Private company

Brookville Equipment

Logo: The logo is from the following website: http://www.brookvillecorp.com/BROOKVILLE-EQUIPMENT-CORPORATION-INTRODUCES-NEW-LOGO-AND-WEBSITE.-09-14-2011.asp?news=News_Corporate.asp http://www.brookvillecorp.com/BROOKVILLE-EQUIPMENT-CORPORATION-INTRODUCES-NEW-LOGO-AND-WEBSITE.-09-14-2011.asp?news=News_Corp, Non-free logo, via Wikipedia4

Rolling stock manufacturer

Brookville Equipment Corporation, based in Brookville, Pennsylvania, United States, manufactures railroad locomotives for industrial and light capacity switching needs. The company also builds and restores streetcars. The company was formerly known as the Brookville Locomotive Company.2 Wikipedia text CC BY-SA 4.0

Last updated Oct 21, 2026.

Overview

1918Founded1
  • Industryrail transport1
  • HeadquartersBrookville1
  • Websitewww.brookvilleequipment.com
  • Legal formBusiness Corporation3
  • LEI549300RNLK5C7YXJJB283
  • StatusActive3
  • LEI statusLapsed (not renewed)3
  • Registered address175 EVANS ST PO BOX 13, 15825 Brookville, United States3
  • Registered withPennsylvania Department of State, 2715693

Brookville Equipment Corporation, based in Brookville, Pennsylvania, United States, manufactures railroad locomotives for industrial and light capacity switching needs. The company also builds and restores streetcars. The company was formerly known as the Brookville Locomotive Company.2

The story

The company began in 1918 by installing flanged railroad wheels on Ford trucks (Road–rail vehicle). The company soon began building gasoline-powered locomotives of their own following World War I. Brookville's locomotives were the first to include planetary drive axles rather than chain drives.

From Wikipedia’s article on Brookville Equipment, shared under CC BY-SA 4.0.5

Products and brands

In 2007, BEC unveiled its CoGeneration locomotives with up to 2,100 horsepower (1,600 kW), generated through the use of three low-emission diesel engines. The use of three clean-burning EPA Tier-3 engines offers a "Power on Demand" feature where engines come on-line as power needs are realized. This feature reduces emissions and fuel consumption. Individual water-cooled IGBT electronic switches for each traction motor improves rail adhesion.

Brookville manufactures equipment used in mining, tunneling, and industrial and switching applications. In 2008, Brookville built its first road switchers for the Metro-North Railroad. The locomotives are given the model designation of BL20-GH.

BEC's Railwalker re-railing devices can also put its locomotives back on-track without the risk of injury to the operator.

Streetcars

The company began manufacturing trucks for streetcars in 2003 – for use in vintage-style cars being newly built by the New Orleans Regional Transit Authority – and since 2002 it has had a streetcar division, working mainly on restoration, refurbishment and remanufacturing of existing streetcars. The first such contract was one to rebuild 18 PCC streetcars for SEPTA Route 15 in Philadelphia. The cars, known as PCC IIs, entered service in 2005. Later work has included restoring PCC cars for use on San Francisco Municipal Railway's F Market & Wharves line and manufacturing replicas of 1923 Perley Thomas streetcars for New Orleans.

Read the full text

On September 14, 2011, Brookville announced plans to develop a low-floor, articulated tram. The design was later named the "Liberty" model, and features the ability to operate away from the overhead electric power wires for a limited distance, using batteries. In early 2013, the company received a $9.4-million order for two Liberty streetcars from Dallas Area Rapid Transit. They are for Dallas's new Dallas Streetcar, which opened for public service on April 13, 2015. The company also built a pair of replica "Red Car Trolley" streetcars for Disney California Adventure in 2012.

2008

Metro-North Railroad ordered 10 BL20GH units, numbers 110-115 in Metro North paint and numbers 125-130 ordered for Connecticut Department of Transportation, painted in New Haven scheme. The order also includes two multi-engine CoGeneration locomotives for MTA Capital and four (115ton) locomotives for the Staten Island Railway. The SIR locomotives are known as BL20G. After their overhaul beginning from 2020, the ConnDOT units were repainted into the CTrail scheme.

2010

Brookville was involved in the building of a low-emissions genset locomotive for the Buffalo and Pittsburgh Railroad that was commissioned in July 2010. The single locomotive was built through a partnership with several local and federal agencies, as well as the railroad and BEC. A second genset was produced for the Buffalo and Pittsburgh, which entered service on December 10, 2010, as well as one for the Ohio Central Railroad, both of which contained an engine kit from Brookville.

2011

Tri-Rail, a commuter rail line in Miami, ordered 12 BL36PH passenger locomotives from Brookville on February 25, 2011, at a cost of $109 million.

2013

Dallas Area Rapid Transit (DART) ordered two Liberty streetcars, with options for two more at a cost of up to $9.4 million, for operations on Dallas' streetcar line.

2015

In March, the first of the two DART streetcars was delivered. In April, two 1,200 horsepower (900 kW) BL12CG genset locomotives were delivered to the Central California Traction Company. In June, the M-1 Rail Line in Detroit, Michigan ordered six streetcars at a purchase price of $32 million. The M-1 cars are equipped with rechargeable lithium-ion batteries and will run on battery power over 60% of the line. In November, Brookville was awarded an $18.6 million contract by the city of Milwaukee for four streetcars for service on the Milwaukee Streetcar, with deliveries planned to begin in late 2017.

2016

In March, the Oklahoma City Streetcar ordered five streetcars, with an option for a sixth, at a cost of $24.9 million.

2017

In June, Valley Metro ordered six off-wire capable Liberty Streetcars for the Tempe Streetcar, at a cost of $33 million. El Paso commissioned the restoration of six PCCs for use on the El Paso Streetcar lines.

From Wikipedia’s article on Brookville Equipment, shared under CC BY-SA 4.0.5

Timeline

  1. 1918Founded Founded1

Funding

Where the company's money came from, by calendar year: private offerings filed with the SEC, federal grants, loans, contracts and other assistance from USAspending.gov, and PPP loans from the SBA. Each bar links to the records below.

Money received by year$5.0M 2020–2021
Money received by yearMoney received by year, 2020–2021: $5.0M in all. PPP loans $5.0M.$0$1M$2M$3M2020 · PPP loans: $3.0M20202021 · PPP loans: $2.0M2021
Figures by year
YearPPP loansTotal
2021$2.0M$2.0M
2020$3.0M$3.0M

PPP loans

Paycheck Protection Program loans of $150,000 and up, approved April 2020 to July 2021, from the SBA6. Matched to this company by name and state.

  1. Apr 12, 2020$3.0M PPP loan (first draw) from PNC Bank, National Association6To BROOKVILLE EQUIPMENT CORP, Brookville PA; $3.0M forgiven Sep 8, 2021
  2. Mar 4, 2021$2.0M PPP loan (second draw) from PNC Bank, National Association6To BROOKVILLE EQUIPMENT CORP, Brookville PA; $2.0M forgiven Mar 23, 2022