Private company

Daintree Networks

Logo: Daintree Networks, Public domain, via Wikimedia Commons3

Building automation company

Daintree Networks, Inc. was a building automation company that provided wireless control systems for commercial and industrial buildings. Founded in 2003, Daintree was headquartered in Los Altos, California, with an R&D lab in Melbourne, Australia. Daintree's ControlScope wireless control includes switches, sensors, LED drivers, programmable thermostats, and plug load controllers.2 Wikipedia text CC BY-SA 4.0

Last updated Oct 21, 2026.

Overview

2003Founded1

Daintree Networks, Inc. was a building automation company that provided wireless control systems for commercial and industrial buildings. Founded in 2003, Daintree was headquartered in Los Altos, California, with an R&D lab in Melbourne, Australia.2

The story

Daintree was founded in 2003 by Bill Wood, who had previously worked as a General Manager for Agilent Technologies, and Hewlett-Packard.

Daintree managers have previously held roles within wireless standards bodies, including chair of several working groups within the Zigbee Alliance.

In 2003, when many wireless technologies were new, Daintree provided design verification and operational support tools for wireless embedded developers. In 2007 the company began developing and delivering wireless systems for specific purposes; by 2009 it had narrowed its focus to lighting and building control.

On April 21, 2016, Current Lighting Solutions, an energy management startup within GE, acquired Daintree Networks for US$77 million to combine its open-standard wireless network with GE's open source platform Predix to offer a new energy management system to businesses.

From Wikipedia’s article on Daintree Networks, shared under CC BY-SA 4.0.4

Products and brands

ControlScope Manager (CSM): Software used to configure, manage, and maintain key energy loads in commercial buildings. It includes management of individual devices and "zones" of multiple devices. This includes calibration, scheduling, alarm notification, energy monitoring, occupancy and daylight control, demand response controls, and an automated commissioning tool.

Wireless Area Controller (WAC): A hardware that manages the wireless network, contains the control algorithms that converts sensing data into commands to ballasts and luminaires, tracks devices and stores their states, and detects issues and repairs the system.

Wireless Adapter: A hardware that enables traditional wired devices to communicate wirelessly within the network. It interfaces wireless signals to wired controls, and can be used in conjunction with devices such as wired sensors, LED drivers, ballasts and switches.

Sensor Network Analyzer (SNA): A discontinued software for the development, deployment and management of wireless hardware devices and embedded applications based technologies such as Zigbee, IEEE 802.15.4, 6LoWPAN, SimpliciTI and Synkro. Carries out performance measurements and graphical network visualization. The SNA is a part of Zigbee Alliance interoperability and certification events. (Discontinued 31-March-2010).

Read the full text

Sensor Network Adapter: A discontinued hardware used as a capture device in wireless embedded networks, able to interact with live Zigbee and IEEE 802.15.4 networks to poll, configure and commission devices. (Discontinued 31-March-2010).

From Wikipedia’s article on Daintree Networks, shared under CC BY-SA 4.0.4

Timeline

  1. 2003Founded Founded1

Sources

The numbers on this page point here. Each one links to the record it came from.

  1. 1
  2. 2
  3. 3
  4. 4