EMG, Inc.

The company was founded in 1976 by Rob Turner in Long Beach, California. It was originally called Dirtywork Studios, and their first pickup continues to be manufactured as models EMG H and EMG HA models. The active humbucking pickup EMG 58 followed soon after. The name was changed to "Overlend" (spelled "Overland" in some sources) in 1978. However, its products have always been called EMG pickups.

In 1981, EMG active pickups became standard equipment on Steinberger basses and guitars. According to Hap Kuffner, EMG pickups originally had widespread success in Europe, after first exhibiting at the 1983 Musikmesse tradeshow in Germany. The name was changed to EMG, Inc. in 1983 ("EMG" stands for "Electro-Magnetic Generator"). As Steinberger guitars became more popular among American metal and rock musicians, so did EMG pickups, and vice versa.

Early EMG pickup designs were made with a bar magnet inside for two reasons. The first reason is that the pole pieces had too much magnetism on the strings and could cause some lower notes to go out of pitch in a Doppler effect. The second reason is that the pole pieces can make tuning and placement of the strings much more difficult. Using the bar magnet however gave the strings a more balanced output. The design of the bar magnet gives it a smoother distortion, better sustain through the amplifier, and have less fade onto the strings than the design of pole pieces.

Overview

EMG pickups are standard equipment on some models from guitar manufacturers such as BC Rich, ESP, Schecter, Cort, Gibson, Dean, Steinberger, Ibanez, and Jackson Guitars. In addition to pickups, EMG Inc. also has a line of guitar and bass accessories, mainly for altering equalization settings such as bass/treble and gain boosting, and designed to work with most pickups. These can be found in instruments made by companies such as Schecter, who ship almost all of their basses with EMG equalization circuitry.

Pickup product range

EMG Inc. has four distinct product ranges; the EMG Standard Series, HZ / SRO Series, SA Series and the EMG X-Series. These pickups are all featured on the official EMG Inc. website and include solderless wiring harnesses.

Standard Series

The Standard Series consists of all their standard active guitar, bass, and acoustic pickups, including humbucking, single coil, and bass models for 4, 5, and 6 string basses. EMG active pickups (such as the EMG 60, EMG 81, EMG 85, and EMG 89) tend to have much higher output than passive pickups of similar design (such as the EMG HZ) because of the on-board preamplifier. The high output, noise-reduction and responsiveness of EMG active pickups has made them popular with hard rock and heavy metal guitarists because they overdrive the input stage of guitar amplifiers more dramatically than a lower output pickup could. In 2012 EMG introduced a new 57/66 set to replace the outdated EMG 60 and EMG 81 configuration in which the designs were based on the James Hetfield "JH Het Set" to mix high output from a passive pickup with the punch of the active pickups.