SGI's first generation products, starting with the IRIS (Integrated Raster Imaging System) 1000 series of high-performance graphics terminals, were based on the Motorola 68000 family of microprocessors. The later IRIS 2000 and 3000 models developed into full UNIX workstations.
The first entries in the 1000 series (models 1000 and 1200, introduced in 1984) were graphics terminals, peripherals to be connected to a general-purpose computer such as a Digital Equipment Corporation VAX, to provide graphical raster display abilities. They used 8 MHz Motorola 68000 CPUs with 768 kB of RAM and had no disk drives. They booted over the network (via an Excelan EXOS/101 Ethernet card) from their controlling computer. They used the "PM1" CPU board, which was a variant of the board that was used in Stanford University's SUN workstation and later in the Sun-1 workstation from Sun Microsystems. The graphics system was composed of the GF1 frame buffer, the UC3 "Update Controller", DC3 "Display Controller", and the BP2 bitplane. The 1000-series machines were designed around the Multibus standard.
Notably, the systems included the Geometry Engine which had been designed by Jim Clark and Marc Hannah at Stanford University under ARPA contract. It handled vector operations for 3D graphics. It was capable of approximately 6 million operations per second.
Later 1000-series machines, the 1400 and 1500, ran at 10 MHz and had 1.5 MB of RAM. The 1400 had a 72 MB ST-506 disk drive, while the 1500 had a 474 MB SMD-based disk drive with a Xylogics 450 disk controller. They may have used the PM2 CPU and PM2M1 RAM board from the 2000 series. The usual monitor for the 1000 series ran at 30 Hz interlaced. Six beta-test units of the 1400 workstation were produced, and the first production unit (SGI's first commercial computer) was shipped to Carnegie-Mellon University's Electronic Imaging Laboratory in 1984.
Read the full text
IRIS 2000 and 3000 series
SGI rapidly developed its machines into workstations with its second product line — the IRIS 2000 series, first released in August 1985. SGI began using the UNIX System V operating system. There were five models in two product ranges, the 2000/2200/2300/2400/2500 range which used 68010 CPUs (the PM2 CPU module), and the later "Turbo" systems, the 2300T, 2400T and 2500T, which had 68020s (the IP2 CPU module). All used the Excelan EXOS/201 Ethernet card, the same graphics hardware (GF2 Frame Buffer, UC4 Update Controller, DC4 Display Controller, BP3 Bitplane). Their main differences were the CPU, RAM, and Weitek Floating Point Accelerator boards, disk controllers and disk drives (both ST-506 and SMD were available). These could be upgraded, for example from a 2400 to a 2400T. The 2500 and 2500T had a larger chassis, a standard 6' 19" EIA rack with space at the bottom for two SMD disk drives weighing approximately 68 kg each. The non-Turbo models used the Multibus for the CPU to communicate with the floating point accelerator, while the Turbos added a ribbon cable dedicated for this. 60 Hz monitors were used for the 2000 series.
The height of the machines using Motorola CPUs was reached with the IRIS 3000 series (models 3010/3020/3030 and 3110/3115/3120/3130, the 30s both being full-size rack machines). They used the same graphics subsystem and Ethernet as the 2000s, but could also use up to 12 Geometry Engines, the first widespread use of hardware graphics accelerators. The standard monitor was a 19" 60 Hz non-interlaced unit with a tilt/swivel base; 19" 30 Hz interlaced and a 15" 60 Hz non-interlaced (with tilt/swivel base) were also available.
The IRIS 3130 and its smaller siblings were impressive for the time, being complete UNIX workstations. The 3130 was powerful enough to support a complete 3D animation and rendering package without mainframe support. With large capacity hard drives by standards of the day (two 300 MB drives), streaming tape and Ethernet, it could be the centerpiece of an animation operation.
The line was formally discontinued in November 1989, with about 3,500 systems shipped of all 2000 and 3000 models combined.
RISC era
With the introduction of the IRIS 4D series, SGI switched to MIPS microprocessors. These machines were more powerful and came with powerful on-board floating-point capability. As 3D graphics became more popular in television and film during this time, these systems were responsible for establishing much of SGI's reputation.
SGI produced a broad range of MIPS-based workstations and servers during the 1990s, running SGI's version of UNIX System V, now called IRIX. These included the massive Onyx visualization systems, the size of refrigerators and capable of supporting up to 64 processors while managing up to three streams of high resolution, fully realized 3D graphics.
In October 1991, MIPS announced the first commercially available 64-bit microprocessor, the R4000. SGI used the R4000 in its Crimson workstation. IRIX 6.2 was the first fully 64-bit IRIX release, including 64-bit pointers.
To secure the supply of future generations of MIPS microprocessors (the 64-bit R4000), SGI acquired the company in 1992 for $333 million and renamed it as MIPS Technologies Inc., a wholly owned subsidiary of SGI.
In 1993, Silicon Graphics (SGI) signed a deal with Nintendo to develop the Reality Coprocessor (RCP) GPU used in the Nintendo 64 (N64) video game console. The deal was signed in early 1993, and it was later made public in August of that year. The console itself was later released in 1996. The RCP was developed by SGI's Nintendo Operations department, led by engineer Dr. Wei Yen. In 1997, twenty SGI employees, led by Yen, left SGI and founded ArtX (later acquired by ATI Technologies in 2000).
In 1998, SGI relinquished some ownership of MIPS Technologies, Inc in a Re-IPO, and fully divested itself in 2000.
In the late 1990s, when much of the industry expected the Itanium to replace both CISC and RISC architectures in non-embedded computers, SGI announced its intent to phase out MIPS in its systems. Development of new MIPS microprocessors stopped, and the existing R12000 design was extended multiple times until 2003 to provide existing customers more time to migrate to Itanium.
In August 2006, SGI announced the end of production for MIPS/IRIX systems, and by the end of the year MIPS/IRIX products were no longer generally available from SGI.
IRIS GL and OpenGL
Until the second generation Onyx Reality Engine machines, SGI offered access to its high performance 3D graphics subsystems through a proprietary API known as IRIS Graphics Library (IRIS GL). As more features were added over the years, IRIS GL became harder to maintain and more cumbersome to use. In 1992, SGI decided to clean up and reform IRIS GL and made the bold move of allowing the resulting OpenGL API to be cheaply licensed by SGI's competitors, and set up an industry-wide consortium to maintain the OpenGL standard (the OpenGL Architecture Review Board).
This meant that for the first time, fast, efficient, cross-platform graphics programs could be written. For over 20 years – until the introduction of the Vulkan API – OpenGL remained the only real-time 3D graphics standard to be portable across a variety of operating systems.
ACE Consortium
SGI was part of the Advanced Computing Environment initiative, formed in the early 1990s with 20 other companies, including Compaq, Digital Equipment Corporation, MIPS Computer Systems, Groupe Bull, Siemens, NEC, NeTpower, Microsoft and Santa Cruz Operation. Its intent was to introduce workstations based on the MIPS architecture and able to run Windows NT and SCO UNIX. The group produced the Advanced RISC Computing (ARC) specification, but began to unravel little more than a year after its formation.
Entertainment industry
For eight consecutive years (1995–2002), all films nominated for an Academy Award for Distinguished Achievement in Visual Effects were created on Silicon Graphics computer systems. The technology was also used in commercials for a host of companies.
An SGI Crimson system with the fsn three-dimensional file system navigator appeared in the 1993 movie Jurassic Park.
In the movie Twister, protagonists can be seen using an SGI laptop computer; however, the unit shown was not an actual working computer, but rather a fake laptop shell built around an SGI Corona LCD flat screen display.
The 1995 film Congo also features an SGI laptop computer being used by Dr. Ross (Laura Linney) to communicate via satellite to TraviCom HQ.
The purple, lowercased "sgi" logo can be seen at the beginning of the opening credits of the HBO series Silicon Valley, before being taken down and replaced by the Google logo as the intro graphics progress. Google leased the former SGI buildings in 2003 for its headquarters in Mountain View, CA until it purchased the buildings outright in 2006.
Once inexpensive PCs began to have graphics performance close to the more expensive specialized graphical workstations which were SGI's core business, SGI shifted its focus to high performance servers for digital video and the Web. Many SGI graphics engineers left to work at other computer graphics companies such as ATI and Nvidia, contributing to the PC 3D graphics revolution.
Free software
SGI was a promoter of free software, supporting several projects such as Linux and Samba, and opening some of its own previously proprietary code such as the XFS filesystem and the Open64 compiler.
SGI was also important in its contribution to the C++ Standard Template Library (STL) with many useful extensions in the MIT-like licensed SGI STL implementation. The extension keeps being carried by the direct descendant STLport and GNU's libstdc++.
Acquisition of Alias, Wavefront, Cray and Intergraph
In 1995, SGI purchased Alias Research, Kroyer Films, and Wavefront Technologies in a deal totaling approximately $500 million and merged the companies into Alias|Wavefront. In June 2004 SGI sold the business, later renamed to Alias/Wavefront, to the private equity investment firm Accel-KKR for $57.5 million. In October 2005, Autodesk announced that it signed a definitive agreement to acquire Alias for $182 million in cash.
In February 1996, SGI purchased the well-known supercomputer manufacturer Cray Research for $740 million, and began to use marketing names such as "CrayLink" for (SGI-developed) technology integrated into the SGI server line. Three months later, it sold the Cray Business Systems Division, responsible for the CS6400 SPARC/Solaris server, to Sun Microsystems for an undisclosed amount (acknowledged later by a Sun executive to be "significantly less than $100 million"). Many of the Cray T3E engineers designed and developed the SGI Altix and NUMAlink technology. SGI sold the Cray brand and product lines to Tera Computer Company on March 31, 2000, for $35 million plus one million shares. SGI also distributed its remaining interest in MIPS Technologies through a spin-off effective June 20, 2000.
In September 2000, SGI acquired the Zx10 series of Windows workstations and servers from Intergraph Computer Systems (for a rumored $100 million), and rebadged them as SGI systems. The product line was discontinued in June 2001.
SGI Visual Workstations
Another attempt by SGI in the late 1990s to introduce its own family of Intel-based workstations running Windows NT or Red Hat Linux (see also SGI Visual Workstation) proved to be a financial disaster, and shook customer confidence in SGI's commitment to its own MIPS-based line.
Switch to Itanium
In 1998, SGI announced that future generations of its machines would be based not on its own MIPS processors, but the upcoming "super-chip" from Intel, code-named "Merced" and later called Itanium. Funding for its own high-end processors was reduced, and it was planned that the R10000 would be the last MIPS mainstream processor. MIPS Technologies would focus entirely on the embedded market, where it was having some success, and SGI would no longer have to fund development of a CPU that, since the failure of ARC, found use only in its own machines. The Origin 2000 server line was intended to get nodeboards loaded with Merced. Production and development delays in as early as 1999 made it clear that the Merced release was going to be delivered late. Stopgap MIPS CPUs, all refinements of the successful R10000 such as the R12000, R14000 and R16000 were released. These were used in a series of MIPS servers and workstations from 1999 through 2006.
SGI's first Itanium-based system was the short-lived SGI 750 workstation, launched in 2001. SGI's MIPS-based systems were not to be superseded until the launch of the Itanium 2-based Altix servers and Prism workstations some time later. Unlike the MIPS systems, which ran IRIX, the Itanium systems used SuSE Linux Enterprise Server with SGI enhancements as its operating system. SGI used Transitive Corporation's QuickTransit software to allow its old MIPS/IRIX applications to run (in emulation) on the new Itanium/Linux platform.
In the server market, the Itanium 2-based Altix eventually replaced the MIPS-based Origin product line. In the workstation market, the switch to Itanium was not completed before SGI exited the market.
The Altix was the most powerful computer in the world in 2006, assuming that a "computer" is defined as a collection of hardware running under a single instance of an operating system. The Altix had 512 Itanium processors running under a single instance of Linux. A cluster of 20 machines was then the eighth-fastest supercomputer. All faster supercomputers were clusters, but none have as many FLOPS per machine. However, more recent supercomputers are very large clusters of machines that are individually less capable. SGI acknowledged this and in 2007 moved away from the "massive NUMA" model to clusters.
Switch to Xeon
Although SGI continued to market Itanium-based machines, its more recent machines were based on the Intel Xeon processor. The first Altix XE systems were relatively low-end machines, but by December 2006 the XE systems were more capable than the Itanium machines by some measures (e.g., power consumption in FLOPS/W, density in FLOPS/m3, cost/FLOPS). The XE1200 and XE1300 servers used a cluster architecture. This was a departure from the pure NUMA architectures of the earlier Itanium and MIPS servers.
In June 2007, SGI announced the Altix ICE 8200, a blade-based Xeon system with up to 512 Xeon cores per rack. An Altix ICE 8200 installed at New Mexico Computing Applications Center (with 14336 processors) ranked at number 3 on the TOP500 list of November 2007.
User base and core market
SGI is known for selling to Hollywood visual effects studios. Nonetheless, SGI's largest revenue has always come from government and defense applications, including energy, and scientific computing. In fact, its largest single sale ever was to the United States Postal Service (USPS), where SGI servers ran an artificial intelligence program that mechanically read, tagged and sorted the mail at several USPS mail centers.
As lower-cost workstations running Linux, Windows and Mac OS X became more capable, and professional software became available on these platforms, SGI's presence in the visual effects industry declined.
High-end server market
SGI continued to enhance its line of servers (including some supercomputers) based on the SN architecture. SN, for Scalable Node, is a technology developed by SGI in the mid-1990s that uses cache-coherent non-uniform memory access (cc-NUMA). In an SN system, processors, memory, and a bus- and memory-controller are coupled together into an entity called a node, usually on a single circuit board. Nodes are connected by a high-speed interconnect called NUMAlink (originally marketed as CrayLink). There is no internal bus, and instead access between processors, memory, and I/O devices is done through a switched fabric of links and routers.
Thanks to the cache coherence of the distributed shared memory, SN systems scale along several axes at once: as CPU count increases, so does memory capacity, I/O capacity, and system bisection bandwidth. This allows the combined memory of all the nodes to be accessed under a single OS image using standard shared-memory synchronization methods. This makes an SN system far easier to program and able to achieve higher sustained-to-peak performance than non-cache-coherent systems like conventional clusters or massively parallel computers which require applications code to be written (or re-written) to do explicit message-passing communication between their nodes.
The first SN system, known as SN-0, was released in 1996 under the product name Origin 2000. Based on the MIPS R10000 processor, it scaled from 2 to 128 processors and a smaller version, the Origin 200 (SN-00), scaled from 1 to 4. Later enhancements enabled systems of as large as 512 processors.
The second generation system, originally called SN-1 but later SN-MIPS, was released in July 2000, as the Origin 3000. It scaled from 4 to 512 processors, and 1,024-processor configurations were delivered by special order to some customers. A smaller, less scalable implementation followed, called Origin 300.
In November 2002, SGI announced a repackaging of its SN system, under the name Origin 3900. It quadrupled the processor area density of the SN-MIPS system, from 32 up to 128 processors per rack while moving to a "fat tree" interconnect topology.
In January 2003, SGI announced a variant of the SN platform called the Altix 3000 (internally called SN-IA). It used Intel Itanium 2 processors and ran the Linux operating system kernel. At the time it was released, it was the world's most scalable Linux-based computer, supporting up to 64 processors in a single system node. Nodes could be connected using the same NUMAlink technology to form what SGI predictably termed "superclusters".
In February 2004, SGI announced general support for 128 processor nodes to be followed by 256 and 512 processor versions that year.
In April 2004, SGI announced the sale of its Alias software business for approximately $57 million.
In October 2004, SGI built the supercomputer Columbia, which broke the world record for computer speed, for the NASA Ames Research Center. It was a cluster of 20 Altix supercomputers each with 512 Intel Itanium 2 processors running Linux, and achieved sustained speed of 42.7 trillion floating-point operations per second (teraflops), easily topping Japan's famed Earth Simulator's record of 35.86 teraflops. (A week later, IBM's upgraded Blue Gene/L clocked in at 70.7 teraflops.)
In July 2006, SGI announced an SGI Altix 4700 system with 1,024 processors and 4 TB of memory running a single Linux system image.
Hardware products
Some 68k- and MIPS-based models were also rebadged by other vendors, including CDC, Tandem Computers, Prime Computer and Siemens-Nixdorf.
SGI Onyx and SGI Indy series systems were used for video game development for the Nintendo 64.
Motorola 68k-based systems
IRIS 1000 series graphics terminals (diskless 1000/1200, 1400/1500 with disks)
IRIS 2000 series workstations (2000/2200/2300/2400/2500 non-Turbo and 2300T/2400T/2500T "Turbo" models)
IRIS 3000 series workstations (3010/3020/3030 and 3110/3115/3120/3130)
Itanium-based systems
SGI 750 workstation
Altix 330 entry-level server
Altix 350 mid-range server
Altix 3000 high-end server
Altix 450 mid-range server
Altix 4000 high-end server, capable of up to 2048 CPUs
Prism (deskside and rackmount systems)
Intel/AMD x86-64 systems
Altix XE210 server
Altix XE240 server
Altix XE310 server
Altix XE1200 cluster
Altix XE1300 cluster
Altix ICE 8200
Altix ICE 8400
Virtu VN200 visualization node
Virtu VS100 workstation
Virtu VS200 workstation
Virtu VS300 workstation
Virtu VS350 workstation
FPGA-based accelerators
RASC Application Acceleration
Storage systems
InfiniteStorage 10000
InfiniteStorage 6700
InfiniteStorage 4600
InfiniteStorage 4500
InfiniteStorage 4000
InfiniteStorage 350
InfiniteStorage 220
InfiniteStorage 120
SGI Infinite Data Cluster
Storage solutions
InfiniteStorage NEXIS 500
InfiniteStorage NEXIS 2000
InfiniteStorage NEXIS 7000
InfiniteStorage NEXIS 7000-HA
InfiniteStorage NEXIS 9000
InfiniteStorage Server 3500
Displays
1600SW, a multi-award-winning wide screen video monitor
Accelerator cards
IrisVision, one of the first 3D graphics accelerators for high-end PCs
Other
Espressigo, Espresso maker in collaboration with Gaggia